Super Power Supply Intelligent Micro Control 230W High Frequency
Core Technology YMK Soldering Station:
■ High quality ring transformer.
■ Reliability and security much higher than the switch power
■ Rolled iron core uses the new high quality silicon steel sheet.
■ Winding adopts high temperature resistant high quality copper
enameled wire enameled wire winding.
■ Power wastage loss less than 25%, electrical efficiency is as
high as above 95%.
■ Unload current Only 10% from the EI type; no electromagnetic
radiation and no vibration noise
230W YMK High Frequency Station Circuit:
MCU control circuit adopts the ATMEL company high-end chip, more
stable, precise control of output temperature and power, to achieve
American Smart Heat technology on output circuit, which can
accurately induction to solder heat energy demand, reduce a lot on
damage the components and the risk of soldering plate.
Tempeturen Testing Comparision:
230W YMK Soldering Station Material Quality:
|surface ring||115*108*9mm||ABS material|
|protective sheet||25*50*1.5mm||tempered (Acrylic) glass|
|power switch||∮22mm,6A250VAC||silver alloy contacts|
|back cover||105*110*1mm||metal materials|
|aviation socket||GX16-6P(B)||metal material|
|power transformer||RT-230||high quality ring type|
|control board||HF-006||glass plate|
|drive circuit board||HF-007||glass plate|
|grounded Block||∮8*4mm||alloy plus temp materials|
|power outlet||10A250VAC||copper temp materials|
|fuse||3A/250V||∮5*20mm,slow blow type|
|Electromagnetic iron||SI-230||electromagnetic heating|
Soldering Station Specification:
|Temperature range||50~600 °C (depending on the mode setting)|
|Maximum ambient temperature||42 °C|
|Temperature stability||±2 °C (in still air, no load)|
|Housing Material||Aluminum Alloy|
230W YMK Soldering Iron Parameter:
|Tip-charged body IR||＞5MΩ|
|Electromagnetic heating core||Electromagnetic heating core|
1) Ring Transformer Power Supply with high quality, high
efficiency, high reliability, high security and long life
2) Blue trinity digital tube display show clearly display under the
strong light .
3) Aluminum alloy shell is treated by anodic oxidation anti-static,
ensure the host has good heat dissipation and long good appearance
4) PBCA components are imported to ensure the long-term stability
of the whole station working.
Product Usage Field:
* LED lights soldering
* Heat sink soldering
* Photovoltaic soldering
* Communication antenna soldering
* Audio equipment soldering
* All the needed low temperature & accurate temperature and big
Room temperature: 25℃
Soldering Cycle: 3 seconds each time
|1||Heat up speed from room temperature to 350 ℃||23 s||25~30 s|
|2||No-load tempearture stability|| || |
| ||Max uprush temperature||351℃||355℃|
| ||Max dropdown temperature||349℃||342℃|
|3||Continuous soldering temperature flutuation|| ||`|
| ||Max uprush temperature||353℃||358℃|
| ||Max dropdown temperature||338℃||310℃|
Testing Comparison: SIXBROS Lead-free Soldering Stations have quite
good performance advantages,its temperature drop during continuous
soldering is relatively small,heat compensation is very rapid,
timely and fully conform to lead-free soldering effect on soldering
YMK High Frequency Soldering Station Work Operating Mode
|Item||Function||mode code||Applicable soldering iron type||Temperature Range||YMK High Frequency Soldering Iron|
|1||Sleeping and automatic shutdown function||0||High-frequency soldering iron||200~420°C||60W|
| || ||1||High-frequency soldering iron|| ||100,150,180,230W|
| || ||2||High-frequency soldering iron(special large one)|| ||100,150,180,230W|
| || ||3||High-frequency soldering iron(special large one)||50~600°C||100,150,180,230W|
| || ||4||High-frequency soldering iron||50~420°C||60W|
| || ||5||High-frequency soldering iron|| ||100,150,180,230W|
| || ||6||High-frequency soldering iron||200~480°C||60W|
| || ||7||High-frequency soldering iron|| ||100,150,180,230W|
|2||No sleeping and automatic shutdown function||0●||High-frequency soldering iron||200~420°C||60W|
| || ||1●||High-frequency soldering iron|| ||100,150,180,230W|
| || ||2●||High-frequency soldering iron(special large one)|| ||100,150,180,230W|
| || ||3●||High-frequency soldering iron(special large one)||50~600°C||100,150,180,230W|
| || ||4●||High-frequency soldering iron||50~420°C||60W|
| || ||5●||High-frequency soldering iron|| ||100,150,180,230W|
| || ||6●||High-frequency soldering iron||200~480°C||60W|
| || ||7●||High-frequency soldering iron|| ||100,150,180,230W|
YMK company service:
※ Good quality and reasonable price.
※ Technical assistance provided.
※ Professional service before and after sale
※ All mails could be replied within 24 hours.
※ Skype video assisted any problem.