RT-S0150 SIXBROS Microcomputer Intelligent Control High Frequency
Theory YMK High Frequency Soldering Station:
Adopt high frequency eddy current heating (induction heating
principle), High frequency Lead free soldering station is heat up
at soldering tip itself, and no heat conduction, reduce thermal
losses, heat up fast and temperature returning quickly.
Technology YMK Soldering Station:
■ Reliability and security much higher than the switch power
■ High quality ring transformer.
■ Rolled iron core uses the new high quality silicon steel sheet.
■ Winding adopts high temperature resistant high quality copper
enameled wire enameled wire winding.
■ Power wastage loss less than 25%, electrical efficiency is as
high as above 95%.
■ Unload current Only 10% from the EI type; no electromagnetic
radiation and no vibration noise.
Soldering Station Arguments:
|Temperature range||50~600 °C (depending on the mode setting)|
|Maximum ambient temperature||42 °C|
|Temperature stability||±2 °C (in still air, no load)|
|Housing Material||Aluminum Alloy|
Auto Sleep Mode Operation:
If you have been chose the working mode with “ auto sleep &
auto shutdown” , it will be show “ ---“ in display if soldering
iron not use for over 20 minutes, by now the temperature of
soldering tip will be down to 200 °C if the setting working
temperature greater or equal to 200 °C or down to 50°C if the
setting working temperature below 200 °C , station will keep this
temperature until recover the soldering.
There are three ways to wake up sleeping:
1. Turn off the power switch and then turn on again.
2. Press any button in Station.
3. Pick up the soldering iron.
Please attention that it can’t wake up If the Soldering station
over 40 minutes in sleeping condition, soldering iron will cut off
the power supply in automatically and no any showing in display.