230W Super Power Intelligent Micro Control High Frequency Soldering
● Suitable for large solder joints .
● High precision to ensure high quality solder joints.
● High stability temperature to ensure stable soldering effect .
● Rapid heating up can soldering continue and make work in high
efficiency (Station only keep < 45℃)
● Password temperature lock function suitable for factory has
specific requirements on soldering temp.
● 16 kinds of working modes easy to meet different field factory
Set Temperature in YMK Soldering Station:
Way 1: press " +" & "-" button to adjust the temperature you
want, and then press ＊ button for confirmation.
Way 2: press ＊ button in first and then press " +" & "-" button
in same time, Hundred Digit is flash, press " +" or "-" button to
find the exactly data, then press ＊ button to move to Ten Digit,
Tem Digit is flash too, again press " +" or "-" button to find the
exactly data; press ＊ button to move to Single Digit, Single Digit
flash as well, press " +" or "-" button to find the exactly data,
finally, press ＊ button one more time for the final confirm.
|surface box||115*108*9mm||ABS material|
|protective sheet||25*50*1.5mm||tempered (Acrylic) glass|
|power switch||∮22mm,6A250VAC||silver alloy contacts|
|back cover||105*110*1mm||metal materials|
|aviation socket||GX16-6P(B)||metal material|
|power transformer||RT-230||high quality ring|
|control board||HF-006||glass plate|
|drive circuit board||HF-007||glass plate|
|grounded Block||∮8*4mm||alloy plus temp materials|
|power outlet||10A250VAC||copper temp materials|
|fuse||3A/250V||∮5*20mm,slow blow type|
|Electromagnetic iron||SI-230||electromagnetic heating|
Soldering Temperature Testing:
Temperature Calibrating Between Soldering Station And Tip:
After you re-set a temperature and use the Temperature Tester to
check the tip if the temperature match with soldering station
temperature or not, if the temperature is not match, then you need
to calibrate the tip temperature, the step as below:
Example: re-set temperature is 380°C and tip temperature is 350 °C.
Enter the tip temperature 350 °C into soldering station and wait
for soldering station self-correction, after several seconds, the
soldering station is back to 380°C, and then use the Temperature
Tester to test the temperature at tip, it should be show 380°C as
well, +/- 5 °C is allowed.
* Recommend using the 191/192 temperature tester.
YMK company service:
※ Good quality and reasonable price.
※ Technical assistance provided.
※ Professional service before and after sale
※ All mails could be replied within 24 hours.
※ Skype video assisted any problem.